Catalog navigation
CAD model selection
Selectable products: 1
HELP_VARIABLE
Company
ABB Low Voltage & Systems
Description
SK1-K - Signal Contact
Bill of material
ABB - 1SAM201903R1203 + SK1-02K Signaling Contact 2 NC with Push-In terminals
Product Id
1SAM201903R1203
Extended Product Type
SK1-02K
Invoice Description
SK1-02K Signaling Contact 2 NC with Push-In terminals
Type
SK1-K
Description
Signal Contact, for lateral mounting at the right; push-in
Short Description
SK1-02K Signaling Contact 2 NC
Long Description
Signaling contacts SK1-K with Push-in spring terminals signal the tripping of the manual motor starter. For SK1 the indication on the device itself is done with a protruding orange button. The contact positions of SK1 need to be manually reset after a tripping event by pushing the orange button. SK1-K signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1-K are available as normally open or normally closed contacts.
International product number
4013614523557
Product number of the Manufacturer
1SAM201903R1203
Manufacturer Name
ABB
Number of contacts as change-over contact
0
Number of contacts as normally open contact
0
Number of contacts as normally closed contact
2
Number of fault-signal switches
1
Rated operation current Ie at AC-15, 230 V
4 A
Type of electric connection
Spring clamp connection
Model
Top mounting
Mounting method
Side mounting
Lamp holder
None
Customs tariff number
85365080
Deeplink product page
Link to product detail page
Procurement
Last updateOct 18, 2023, 7:40 PM
Part number1SAM201903R1203
AUSSCHREIBEN.DEhttps://ausschreiben.de/catalog/abb/catalogItem/96eaf24d-61c1-46ae-a5f0-75ec44413099
Currency:
$
£
¥
CN¥
All information without guarantee
Last update: Oct 18, 2023, 7:40 PM
Preview - Generation
Preview
3D
2D

Classifications
CNS
Object Properties:
Order Number: 1SAM201903R1203
Description long: Signaling contacts SK1-K with Push-in spring terminals signal the tripping of the manual motor starter. For SK1 the indication on the device itself is done with a protruding orange button. The contact positions of SK1 need to be manually reset after a tripping event by pushing the orange button. SK1-K signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1-K are available as normally open or normally closed contacts.
Description short: SK1-02K Signaling Contact 2 NC
Manufacturer / brand name: ABB
Product website: Link to product detail page
Customs Tariff Number: 85365080
ETIM 8.0
Auxiliary contact block:
Mounting method: Side mounting
Model: Top mounting
Lamp holder: None
Rated operation current Ie at AC-15, 230 V: 4 A
Type of electric connection: Spring clamp connection
Number of fault-signal switches: 1
Number of contacts as normally closed contact: 2
Number of contacts as normally open contact: 0
Number of contacts as change-over contact: 0